您好,欢迎光临莱州中科聚峰机械有限公司官方网站! 郑重声明 进入官网

混凝土自动上料搅拌车的上水流程?

来源:http://www.sdzkjf.cn/ 日期:2021-03-15 发布人:zhongke
以为自动上料搅拌车需要自己准备水管将水注进入搅拌罐,其实不需要。因为自动上料搅拌车是自带水箱的,在搅拌混凝土前操作员将水箱上满水就可以。
I think that the automatic feeding mixer needs to prepare its own water pipe to inject water into the mixing tank, but it doesn't need to. Because the automatic feeding mixer has its own water tank, the operator can fill the water tank with water before mixing concrete.
图为自动上料搅拌车正在为水箱注水。水箱位于搅拌罐正下方,两边水箱相互连接、相对布局,总容量600升,搅拌车配备“自吸式”的24V大容量水泵,吸水迅速,3分钟时间就能把水箱灌满。
The picture shows that the automatic feeding mixer is filling the water tank. The water tank is located directly below the mixing tank. The water tanks on both sides are connected and arranged in a relative way, with a total capacity of 600 liters. The mixing truck is equipped with a "self-priming" 24 V large capacity water pump, which can absorb water quickly and fill the water tank in 3 minutes.
除了外吸水泵、大容量水箱,优重自动上料搅拌车还配备自动注水系统。待水箱灌满水后,驾驶员在驾驶室操作启用水泵,自动注水系统就会将水箱里的水注进搅拌罐,与其他原料混合,共同搅拌混凝土
中科搅拌机
In addition to the suction pump, large capacity water tank, Youzhong automatic feeding mixer is also equipped with automatic water injection system. After the water tank is filled with water, the driver operates the water pump in the cab, and the automatic water injection system will inject the water in the water tank into the mixing tank, mix it with other raw materials, and mix the concrete together.
因此那些繁琐的步骤比如自己准备水管、再费力将水灌进高处的搅拌罐口等是根本不需要的,在自动上料搅拌车设计之初,这些繁琐步骤已经被打包省掉,毕竟便利、效率才是自上料搅拌车的设计初衷。
Therefore, those tedious steps, such as preparing the water pipe and pouring the water into the high mixing tank, are not needed at all. At the beginning of the design of the automatic feeding mixer, these tedious steps have been packed and saved. After all, convenience and efficiency are the original intention of the design of the automatic feeding mixer.
自动注水系统另一大用处就是在每天作业结束时,将搅拌罐清洗干净,防止混凝土凝固于罐内影响第二天的使用。
Another big use of automatic water injection system is to clean the mixing tank at the end of daily operation, so as to prevent the concrete from solidifying in the tank and affecting the use of the next day.
既然搅拌罐内部由自动注水系统清理,搅拌罐外部包括整个搅拌车的车身当然也得清理干净,为此,优重自动上料搅拌车配备了高气压水枪,专用于清洗搅拌车车身,能迅速将污垢剥离、冲走,还搅拌车一个精神干净的“面貌”,经济环保更便利。
Since the internal part of the mixing tank is cleaned by the automatic water injection system, the external part of the mixing tank, including the whole body of the mixing truck, must also be cleaned. Therefore, the Youzhong automatic feeding mixing truck is equipped with a high-pressure water gun, which is specially used to clean the body of the mixing truck. It can quickly peel off and wash away the dirt, and give the mixing truck a clean "appearance", which is more convenient for economic and environmental protection.
好了,混凝土自动上料搅拌车上水的问题我们就介绍到这。对混凝土工程来讲,自动上料搅拌车不仅包生产、还包清理,综合各因素来看,真可谓是混凝土的“宝藏搅拌车”了。
OK, let's introduce the problem of automatic concrete feeding mixer. For concrete engineering, the automatic feeding mixer not only includes production, but also cleaning. Considering various factors, it is really the "treasure mixer" of concrete.
今天的精彩内容由中科搅拌机提供,真诚为您提供满意的服务,如果您有疑问或者是问题请欢迎来电咨询,或者是进入我们的网址:http://www.sdzkjf.cn
Today's wonderful content is provided by Zhongke mixer. We sincerely provide you with satisfactory service. If you have any questions or questions, please call us or enter our website: http://www.sdzkjf.cn

上一篇:自上料搅拌车密封圈的使用
下一篇:自动上料搅拌罐的维护应该注意些什么?