1. Make sure to turn slowly.
We all know that the center of gravity of concrete mixer is high and easy to overturn! Slow down and downshift early before turning. Try not to step on the brake when turning. Pay attention to observe whether the bottle is spinning through the reversing mirror at any time and any place, and try to slow down the number of revolutions. If the number of revolutions is too high, the car is easy to swing.
Stop the tank on the road with large elevation angle, and stop the tank on the road with large skew angle when full load. The original center of gravity of the concrete mixer is high, and the termination of the rotation of the tank is beneficial to maintain the stability of the car.
2. Use the right low gear to pass the rotten road.
When encountering bumps and bumps on the ground, use a suitable low gear to pass through, so as to ensure that the car has explosive power anytime and anywhere. Wood, sharp gravel must avoid, especially heavy car!
3. The best choice for steep slopes is to downshift early.
If it is full, pay attention to the uphill should be gentle, steep slope should be paid more attention to, can't disorderly downshift, had better downshift early. Moreover, the maximum number of rotations for accelerating irrigation has been eliminated.
4. When going downhill, avoid taxiing in neutral.
Before driving or going downhill for a period of time, you should be used to checking the brake. Avoid taxiing downhill in neutral gear for heavy vehicles. When turning downhill, reduce the speed early, then reduce the gear and then reduce the speed again. The braking effect with gear is the best.
5. We must pay attention to the problem of height limit.
The real-time road condition of the construction site is complex, so it is necessary to be careful of big trees, especially to avoid scraping cables.