1. Corrosion caused by environmental factors. The area with high relative humidity will accelerate the rusting of automatic mixer, especially when the temperature is just above freezing point. In humid areas, the automatic mixer should be kept as dry as possible to avoid local rusting and rusting. If the ventilation is poor, using high temperature to dry the full-automatic mixer, it is also easy to rust and rust the body of the full-automatic mixer.
2. The erosion of harmful substances. The salt, alkali and dust containing chemical substances produced on the road can accelerate the rust of the full-automatic mixer, especially the corrosion caused by the pollution of salt, alkali, dust and water vapor, which will rust the body of the full-automatic mixer. In the coastal area, the air contains salt, industrial pollution caused by acid rain and other harmful chemicals will also aggravate the corrosion of automatic mixer. In the northern cold area, in order to make the road not easy to freeze, salt water is usually sprayed on the road, and the car body of the full-automatic mixer will be rusted when the full-automatic mixer is driven.
3. Corrosion after mechanical damage. The automatic mixer is scratched by accident or stone collision, which can also lead to corrosion.
On rainy days, drivers often encounter the problem that the engine is not easy to start. Sometimes, even if they start it reluctantly, they are still powerless. This problem may be caused by the leakage of the ignition system due to moisture. In addition, it may be that when it rains and gets cooler, the hot air sealed in the distributor may condense into water droplets, causing a small flood inside the distributor, thus losing its normal ignition function.
Once it is found that poor ignition and poor performance of mixer engine are caused by damp ignition system, dry the inside and outside of distributor and wires with dry paper towel or dry cloth, and then spray desiccant on distributor cover, battery connector, spark plug, high voltage wire and ignition coil with special desiccant spray tank. After a while, the mixer engine can be started.