1、 What does the mixer tug do?
The tug of the mixer truck is a bearing, which is used to support the tank and is integrated with the mixer truck to assist mixing.
2、 What does the mixer tug do?
Generally, it is not recommended to replace it by yourself. Go directly to the after-sales point to find a special person to replace it, and the oil used must meet the requirements, otherwise it will cause great damage to the equipment and greatly shorten the service life. Replace the hydraulic oil with a reasonable grade.
3、 What is the relationship between tank filling rate of mixer truck and tank inclination?
At present, the inclination angle of the mixer is about 12 degrees, and the filling rate is about 63%. The inclination angle is not easy to measure, and the filling rate is difficult to calculate. At present, the mixer trucks sold are subject to the useful mixing volume.
4、 What is the reason why the tank of the concrete mixer doesn't rotate and has no force when it is turned, but the hydraulic oil is sprayed out from the oil filler of the mailbox?
The hydraulic pressure goes back and forth one by one. The lack of inlet force may be that the closed part of the oil pump is broken. The return oil flushes. The sealing foot pad of the oil pump may be damaged.
5、 What is the speed of the mixing drum of the mixing truck?
The rotating speed of the mixing drum during feeding is 6-10 rpm; Speed of mixing drum during mixing: 6-10 rpm.
6、 What is the distance from the feed inlet of 8-12 m3 concrete mixer to the ground?
Generally, the height of 8-12 square mixer truck is about 3.8 meters, and the feed inlet is about 3.5 meters away from the ground. The details are determined according to different models.
7、 How to clean the tank of cement mixer?
For the water tank equipped with the mixer truck, the water shall be put into the tank after unloading each time, and the water shall be mixed when returning. After arriving at the mixing plant, the water shall be discharged and received. The surface of the tank should be cleaned when the water tank is filled with water. Of course, it can also be cleaned directly with the water in the water tank. If the cement slurry has solidified, find a special cleaning tank inside the tank, and brush the surface with oxalic acid.
The above highlights come from: self feeding cement mixer, and more highlights come from: http://www.sdzkjf.cn Welcome to communicate with us.