自动搅拌车的发动机一般都是搭配马力比较大的，不同的司机驾驶同一辆搅拌车，有的司机总说车辆上坡没劲，油耗还一直居高不下，这是怎么回事呢？

　　The engine of automatic mixer is generally matched with large horsepower. Different drivers drive the same mixer. Some drivers always say that the vehicle is boring uphill, and the fuel consumption has been high.

　　如果搅拌车定期的更换机油、机油滤芯、柴油滤芯、空气滤芯的话，那应该就是一下几个问题：

　　If the mixer regularly changes the oil, oil filter, diesel filter and air filter, it should be the following problems:

　　增压器损坏，如果增压器叶轮轴匡动，罐内有机油基本断定已经损坏，另外要检查管道，气泵打压用泡沫水检查增压机和出气管接头橡胶卡扣处是否有漏气现象。

　　If the turbocharger blade shaft is damaged, the oil in the tank is basically damaged. In addition, it is necessary to check the pipeline and air pump pressure with foam water to check whether there is leakage at the rubber buckle of the supercharger and outlet pipe joint.

　　检查中冷器是否断裂，同样的方法气泵打压仔细检查水箱前面中冷器是否有漏气，调整气门，定时按车辆的数值找人员来调整气门间隙。

　　Check whether the intercooler is broken. In the same way, the air pump is pressed to carefully check whether the intercooler in front of the water tank is leaking, adjust the valve, and find professionals to adjust the valve gap according to the kilometer value of the vehicle.

　　更换达标的尿素，选择车用尿素一定要买合格的产品，不要轻易改动尿素喷头，有些搅拌车司机为了省钱，故意石子改装尿素喷头，有的人直接将插头拔掉，不使用尿素。

　　Replace the standard urea, choose car urea must buy qualified products, do not easily change the urea nozzle, some mixing car drivers in order to save money, deliberately stone urea nozzle modification, some people directly unplug, do not use urea.

　　挂档前推不到位，后拉不到底。有很多的车辆挂档都是比较重的，很多时候还挂不到位，这种情况一般有以下一个原因：

　　The front push is not in place, and the back pull is not in the end. There are a lot of vehicles are relatively heavy gear, many times are not in place, this situation generally has the following reason:

　　挂挡杆或者球头磨损，从挂档下方一直到变速箱上面有很多个球头，由于在平时开车过程中需要不断的变更档位，所以球头比较容易磨损，发现匡动就要及时更换。

　　There are many ball heads from below the gear to the gearbox. Because in the usual driving process, the gear needs to be constantly changed, so the ball head is easier to wear and tear. It is found that quanqu will be replaced in time.

　　变速杆拉线，现在很大一部分专用车采用变速箱拉线设计，拉线使用时间长了就会起刺变长，就会导致挂档费劲甚挂不上档，发现拉线问题要及时更换。等等。

　　The gear lever pull line, now a large part of special vehicles use the gearbox pull line design, the pull line used for a long time will thorn and become long, it will lead to difficult or even can not hang up the gear, found that the pull line problem should be replaced in time. And so on.

　　自动搅拌车在上坡时怎么会没劲？以上便是原因了，如果您还想了解更多的内容，那就来网站www.sdzkjf.cn咨询吧！

　　How can a mixer be boring on a hill? That's the reason. If you want to know more, go to www.sdzkjf.cn!