At present, the automatic cement mixer is indispensable in construction. This equipment greatly improves the efficiency and quality of work, but the automatic cement mixer may have some faults for various reasons. What is the reason why the first two steel plates of the automatic cement mixer are easy to break?
Use the emergency brake. When driving on a hill, using emergency braking on a downhill road may cause the front plate to break. Due to the braking force, most of the load mass of the automatic cement mixer is advanced and received by the front leaf spring, which is easy to cause fatigue damage of the leaf spring. It is recommended to use the exhaust brake to reduce emergency braking.
Front wheel brake adjustment is too tight. If the braking performance of the rear wheel is poor or a problem occurs suddenly, apply the emergency brake to destroy the front leaf spring through excessive impact. The road is not good, overloaded, and the front leaf spring is subject to excessive impact, which is easy to cause damage. The front leaf spring is often overloaded for a long time, with reduced elasticity and rigidity and fatigue damage.
Replace the inferior leaf spring, and the blade bending does not meet the standard. Poor steel plate material or poor heat treatment leads to uneven stress and fracture.
In order to prevent similar problems of the mixer truck from happening again, regular maintenance is required. The wrong maintenance method will not only reduce the quality of the equipment, but also seriously damage some parts, which will greatly reduce its service life. Therefore, I hope that through today's study, we must pay attention to the maintenance in the future and do not make the same mistakes.
Knowing the reason why the first two steel plates of the automatic cement mixer are easy to break can effectively avoid this problem. For more corresponding contents, please pay attention to www.sdzkjf.com Cn know the information!