As a special truck for transporting concrete, the daily maintenance of the automatic cement mixer is very important. If the maintenance of the mixer is not in place, the service performance and life of the mixer will be affected. What is the maintenance of the automatic cement mixer in all directions?
1. When the new vehicle is used for 1~2 weeks, the connecting bolts and riding bolts of the auxiliary beam and the main vehicle beam should be tightened again, and then tightened every half month. Check whether the fixing bolts of the supporting wheel seat, the connecting bolts of the oil pump and the transmission shaft are loose, and then tighten them once a month.
2. Regular maintenance is also called maintenance according to the specified period. It is generally referred to as technical maintenance. Small tractors have two levels, automobiles have three levels, and large and medium-sized tractors have four levels. Each level of maintenance has its own maintenance content and determined maintenance cycle, and the operator should complete the maintenance on time and carefully.
3. Seasonal maintenance is a kind of seasonal maintenance that will be carried out temporarily before winter or summer. Its purpose is to make the vehicle work adapt to the change requirements. The main maintenance contents are:
Clean the fuel and lubricating system, and replace the fuel and lubricating oil that meet the seasonal requirements; The specific gravity of electrolyte of the battery shall be readjusted according to the seasonal temperature, and the voltage limit value of the generator shall be adjusted accordingly; Clean the cooling system, replace or remove the antifreeze according to the seasonal requirements, and check whether the thermostat works normally.
4. Storage maintenance is a kind of maintenance that needs to be carried out when the vehicle is parked or sealed for storage for a long time. The maintenance mainly includes cleaning, cleaning, lubrication, protection, etc. Its purpose is to prevent or reduce the adverse effects of various harsh conditions on the machine during storage, and ensure that the vehicle is always in good standby state.
5. Special maintenance is a kind of coping maintenance for vehicles after major abnormal events. For example, if the vehicle is overturned into the river, after being fished out, if there is no major damage to the parts, a coping maintenance is required before reuse.
For another example, in case of an engine runaway accident, when the runaway is stopped, the crank linkage mechanism and other relevant parts must be subject to a coping maintenance, so that the technical status of these parts can be completely restored to normal before restarting operation.
The above is the maintenance content of cement automatic mixer in all directions. While using the car, attention should also be paid to maintenance, so as to increase its life and better use. Follow us http://www.sdzkjf.cn , learn more!