In summer, the water temperature of concrete mixer is easy to be too high. If the temperature is too high, it will affect the normal use of the equipment. Here we introduce the high water temperature solution of Zhongke Jufeng mixer:

　　1、冷却风扇不转，冷却风扇可由温度开关控制;它也可以由水温传感器控制。

　　1. If the cooling fan does not turn, the cooling fan can be controlled by the temperature switch; it can also be controlled by the water temperature sensor.

　　二、降温不及时

　　2、 Cooling is not timely

　　1. 防冻液:要求全年添加防冻液。

　　1. Antifreeze: it is required to add antifreeze throughout the year.

　　2. 水或蒸馏水:临时替代。水箱盖漏水。

　　2. Water or distilled water: temporary replacement. The water tank cover is leaking.

　　三、水箱堵塞了

　　3、 The water tank is blocked

　　1. 使用水或空气外部堵塞的污垢。

　　1. Use water or air to remove dirt from external blockage.

　　2. 内部堵塞会影响冷却液的循环，产生压力，导致水箱漏水，高速运行时水温极高。

　　2. Internal blockage will affect the circulation of coolant, generate pressure, cause water leakage of water tank, and the water temperature is very high when running at high speed.

　　4、泵故障

　　4. Pump failure

　　1. 由于叶轮打滑或夹持造成正时皮带断裂;

　　1. Timing belt is broken due to impeller slipping or clamping;2. 叶轮变形。

　　2. The impeller is deformed.

　　四、汽缸侵蚀

　　4、 Cylinder erosion

　　1. 当燃烧室和水渠冲洗时，水会从排水管排出或排出白烟，导致水箱经常缺水。

　　1. When the combustion chamber and water channel are flushed, the water will be discharged from the drain pipe or white smoke will be discharged, resulting in frequent water shortage of the water tank.

　　2. 水渠、油沟冲洗(油与水呈白色)。

　　2. Flushing of water channel and oil groove (oil and water are white).

　　3.水渠与水渠的冲击，导致缸体散热不良，尤其是在高速时的冲击更大。

　　3. The impact of water channel and water channel leads to poor heat dissipation of cylinder block, especially at high speed.

　　介绍了搅拌车水温过高的处理方法。一旦水温过高，需要及时。否则，很容易造成车辆损坏。

　　The treatment method of high water temperature in zhongkejufeng mixer was introduced. Once the water temperature is too high, it needs to be solved in time. Otherwise, it is easy to damage the vehicle.