Reversing is a technical activity, which can best test the driving skills of drivers, especially small-scale mixers, because small-scale mixers generally work in mines or tunnels. The working environment is relatively narrow, reversing is more inconvenient, so we have to be more careful!
Blind area 1: Front
Because the area crossed by the front of the car during reversing is much larger than that occupied by the body, while paying attention to the rear of the car, don't ignore the observation of the front of the left and right ends, especially the pedestrians passing in front of the car at this time.
Blind zone 2: the area near the side of the vehicle
The areas close to both sides of the cement mixer can not be seen, and when turning the direction, the track of the front wheel is an arc, and there is a wheel difference with the rear wheel, so scratch may occur when reversing.
Blind zone 3: below the rear windshield
This area is completely invisible when reversing without auxiliary equipment; On the contrary, if there is a reversing radar, the reversing radar can not guarantee complete judgment when encountering some low obstacles.
Blind area 4: the area behind the right side of the vehicle body
This is the farthest area from the driver and the most difficult area to observe, because it is often blocked by the C-pillar (the more streamlined the shape of the car, the more serious the blind area) and is at the rear of the concrete mixer, so a slight carelessness will cause a collision.
The above information is the knowledge sharing provided by the loading cement mixer to Xiaobian. For more wonderful contents, please click our website: http://www.sdzkjf.cn , we will have more content for you to check later