您好,欢迎光临莱州聚峰机械有限公司网站! 郑重声明 进入官网

选购合适的搅拌车要提前去了解它的结构等方面

来源:http://www.sdzkjf.cn/ 日期:2022-06-20 发布人:admin
搅拌车常用于建筑项目,虽然开起来有点难,但需求量大,利润还是可观的。当然如果您要选购到合适的搅拌车,就要提前去充分了解搅拌车的结构等方面的内容。
Mixer trucks are often used in construction projects. Although it is a little difficult to drive, there is a large demand and a considerable profit. Of course, if you want to buy a suitable mixer, you should fully understand the structure of the mixer in advance.
要了解搅拌车的工作原理。搅拌车主要由底盘和上车体两部分组成。它的工作原理是利用搅拌槽内的叶片不断搅拌槽内的混凝土,使其在一定时间内凝固,使搅拌车到达施工现场后仍能满足使用条件。
Understand the working principle of mixer truck. The mixer truck is mainly composed of chassis and upper body. Its working principle is to use the blades in the mixing tank to continuously mix the concrete in the tank to make it solidify within a certain time, so that the mixer can still meet the service conditions after arriving at the construction site.
自动搅拌车的结构也应该清楚。搅拌罐是整个搅拌车的主要部分。作为储存混凝土的容器,它对防止其凝固和离析起着决定性的作用。搅拌罐由前锥段、后锥段、圆柱段、叶片、滚道组成。前端与减速机连接。
The structure of the automatic mixer truck should also be clear. The mixing tank is the main part of the whole mixer truck. As a container for storing concrete, it plays a decisive role in preventing its solidification and segregation. The mixing tank is composed of front cone section, rear cone section, cylinder section, blade and raceway. The front end is connected with the reducer.
后端通过托轮支撑在副车架上,罐体采用高强度钢板,叶片采用高强度细晶合金钢,具有更高的耐磨性,整个机头一次性旋压成型,与加强板焊接后更耐用。进料口采用漏斗形设计,进料速度更快。整个罐体焊接后,外圈加工,保证同轴度要求。
The rear end is supported on the subframe through the supporting wheel. The tank body is made of high-strength steel plate, and the blade is made of high-strength fine-grained alloy steel, which has higher wear resistance. The whole machine head is formed by one-time spinning, which is more durable after welding with the reinforcing plate. The feed inlet adopts funnel-shaped design, and the feeding speed is faster. After the whole tank is welded, the outer ring is processed to ensure the coaxiality requirements.
自动搅拌车
副车架是搅拌车的主要承重部件。运行期间的负载几乎由它支撑。此外,行驶过程中路面的颠簸和减速造成的冲击对副车架也有影响。副车架由主梁和后台支撑架组成。主梁采用整体箱式结构梁,从根本上增强了其抗扭能力,保证了刚度要求。
The subframe is the main load-bearing component of the mixer. The load during operation is almost supported by it. In addition, the impact caused by road bumps and deceleration during driving also has an impact on the subframe. The subframe is composed of main beam and backstage support frame. The main beam is an integral box structure beam, which fundamentally enhances its torsional capacity and ensures the stiffness requirements.
使用搅拌车运输混凝土有很多优点:
There are many advantages to transporting concrete with mixer truck:
1、搅拌车和泵车合二为一,降低了采购成本。
1. The mixer truck and pump truck are combined into one, which reduces the procurement cost.
2、搅拌车的使用大大提高了工作效率,加快了施工进程。
2. The use of mixer greatly improves the work efficiency and speeds up the construction process.
3、搅拌车的使用减少了劳动力的使用。
3. The use of mixer reduces the use of labor.
4、搅拌车使用方便快捷。
4. The mixer truck is easy to use.
5、自动搅拌车也可用于租赁,投资成本不高,快。
5. Automatic mixer can also be used for leasing, with low investment cost and fast return on investment.
以上就是今天为大家分享的关于问题的相关内容,希望对大家能有所帮助,想要了解更多内容可以电话联系我们或者关注我们的网站http://www.sdzkjf.cn
The above is the relevant content about the problem shared for you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.sdzkjf.cn 。

上一篇:水泥搅拌车使用有时会受限制需要及时应对
下一篇:搅拌车低温环境下使用要遵守相关指南