In the construction process, the automatic cement mixer will continue to operate efficiently in order to improve its own interests. If the equipment is repaired due to defects, it will increase a lot of costs. Generally, the wear of parts is common in the operation of cement automatic mixer truck. What should we do to avoid this?
The load nature and size of such mechanical equipment have an important impact on the wear of equipment parts. Generally, the wear of mechanical parts will increase with the increase of load. When the load borne by the parts is higher than the designed working load, the wear of their components will continue to increase.
Clean in time
Mechanical impurities generally refer to dust, soil and other substances, as well as some metal scraps and oil stains that occur during the operation of construction machinery. Once these impurities reach the working surface of the machine, they will do great harm: not only increase the friction, but also increase the fuel consumption. It will also damage the smooth oil film and scratch the cooperation appearance.
Prevention of corrosion of parts
The corrosion effect on the parts is sometimes difficult to be found, but it is simply ignored and more harmful. Rainwater, chemical substances in the air, etc. penetrate into the machinery through the pipes and gaps of mechanical parts, corroding the parts. The continuous operation of corroded parts will also accelerate the wear of machinery and increase the mechanical defects. This requires managers and operators to adopt reasonable construction arrangements according to the local weather conditions and site conditions at that time, so as to minimize the harm of chemical corrosion to mechanical parts.
During operation, the temperature of each component has its own normal scale. If the temperature is too high or too low, the strength of the parts will be affected. Therefore, it is necessary to cooperate with the coolant and smooth oil to control the temperature of some parts, so that they can operate at a reasonable temperature scale.
Many mechanical equipment are caused by wear of parts at the beginning of their defects, and the same is true of automatic cement mixer during operation. Therefore, to reduce the wear of equipment parts in the use process can effectively avoid the defects of mechanical equipment in the use process. More relevant precautions come to our website http://www.sdzkjf.cn Consult!