The peak period of 1-2 years, the first two years of the use of concrete mixer truck is the peak period of life, which can be said to be the best time for the use of concrete mixer truck, which is equivalent to the youth period of people. During this period, people are full of enthusiasm and dare to do something, and they don't seem to be tired. The concrete mixer truck in this period is also the same. The condition of the truck is excellent. As long as the routine maintenance is required, there will be no problem at all. However, some cement mixers are of poor quality, and the peak period can only last about one year. Therefore, the new car in the first year of driving process will not have any major quality problems, but the use of more than two years of concrete mixer truck will gradually change some of the most vulnerable parts.
2-4 years of Microsoft period. At this stage, the concrete mixer truck has initially entered the Microsoft period. It's not as vigorous as it was in the early days. During this period, the concrete mixer needs to change some parts to supplement energy. At first, new brake pads were needed. The brake skin is the first defense for safe driving. According to experience, the brake skin will wear in about two years. At this time, the fuel pump should be cleaned or replaced. Assuming that the concrete mixer runs restlessly and stably, we should reflect on the shock absorber of the truck. Assuming that the spring of the shock absorber is elastic, driving on rainy days is very risky. Sand and gravel are the main components of concrete. They make the concrete storage tank and the inlet and outlet wear seriously. Due to the different manufacturing materials of the tank body of each manufacturer, its working life is quite different.
Prolong the service life of concrete mixer truck? What should we start with?
New car maintenance, also known as test run maintenance. The new car or the vehicle after overhaul needs to be run in. After the test run, it is necessary to protect and maintain the vehicle. The main contents are as follows: clean the smooth system; replace the smooth oil; tighten the cylinder head nut from the beginning according to the regular torque; check and adjust the driving belt, operation organization, valve clearance and fastening condition of the connecting parts.
2. Shift maintenance, also known as daily maintenance. The vehicles shall be cleaned and checked after each shift (day). If it is found that there is a lack of smooth oil and cooling water, it should be increased from the beginning.
3. Seasonal maintenance is a kind of seasonal maintenance that will be carried out temporarily before winter or in summer. The intention is to make the working habit of the vehicle handle the changing demand.
The above content is the content introduced to you today. We sincerely provide you with Zhongke mixer service. Your satisfaction is our responsibility. Welcome to leave a message at the bottom of the website: http://www.sdzkjf.cn