Concrete mixer is widely used in small and medium-sized projects such as foundation, cast-in-place pile, floor slab, pavement, yard, slope protection, ditch, river channel, bridge, culvert, tunnel, small and medium-sized reservoir, etc. In order to better use the equipment, users need to have a deep understanding of the company's product performance, quality, and service when purchasing the equipment, in order to avoid worries. Therefore, when accepting concrete mixing, users must meet the following conditions when debugging the equipment:

1、需调试设备各部件、附件及随机东西应按标准装备齐全。

1. All components, accessories, and random items of the equipment that need to be debugged should be fully equipped according to the standard.

2、备好液压油和润滑油脂，液压油的油质应符合要求。

2. Prepare hydraulic oil and lubricating grease, and ensure that the oil quality meets the requirements.

3、按规定加注液压油、燃油、润滑油和冷却水，且液压油加规定油面。

3. Fill hydraulic oil, fuel, lubricating oil, and cooling water according to regulations, and add hydraulic oil to the specified oil level.

4、应对混凝土泵进行检查、调试和试运转，使之进入正常作业状况，液压体系调试后应符合标准。

4. The concrete pump should be inspected, debugged, and tested to ensure it enters normal operating conditions. The hydraulic system should meet the standards after debugging.

5、调试用混凝土搅拌车管管路管径为125。

5. The pipe diameter of concrete mixer truck for commissioning is 125.

6、设备应安放在平整坚实的地面上。用户们除了对在购买产品时需严格检验以外，其实在日常保养问题上也是不可缺少的必要工作，这样才能达到在操作过程中使用轻松且使用寿命更长的理想效果。

6. The equipment should be placed on a flat and solid ground. In addition to strict inspection when purchasing products, users are also indispensable and necessary in daily maintenance issues, in order to achieve the ideal effect of easy use and longer service life during the operation process.