一、搅拌车拖轮是干什么的？
1、 What is the mixer tug for?
搅拌车拖轮是个轴承，用于把罐体支撑起来，与搅拌车是一体的，辅助搅拌。
Mixer tug is a bearing, used to support the tank, and mixer is one, auxiliary mixing.
二、搅拌车液压泵怎么换油？
2、 How to change oil for hydraulic pump of mixer truck?
一般不建议自己换，直接到售后点找技术人员更换，而且使用的油须符合要求，不然对设备损害很大，使用寿命也会大大缩短，更换合理标号的液压油。
Generally, it is not recommended to replace it by yourself, but directly go to the after-sales point to find a technician to replace it, and the oil used must meet the requirements, otherwise it will cause great damage to the equipment and greatly shorten the service life, so it is necessary to replace the hydraulic oil with reasonable label.
三、搅拌车罐体填充率跟罐体倾角有什么关系？
3、 What is the relationship between the filling rate of mixer tank and the inclination angle of tank?
目前搅拌车倾角在12度左右，填充率为百分之63左右，倾角不好测量，填充率也很难计算。目前销售的搅拌车都以搅拌容积为准。
At present, the inclination angle of the mixer is about 12 degrees, and the filling rate is about 63%. It is difficult to measure the inclination angle and calculate the filling rate. At present, the sales of mixer are subject to the mixing volume.
四、水泥自动搅拌车罐不转，转开了没力而液压油从邮箱加油口喷出来是什么原因？
4、 Concrete mixer tank does not turn, turn to open no force and hydraulic oil from the mailbox fuel spout out what is the reason?
液压一个进一个回，进没力可能是油泵封闭部分坏了。回油冲，可能是油泵封闭脚垫坏了。
The hydraulic pressure goes in and out one by one. If there is no force, the sealing part of the oil pump may be broken. The return oil is flushed. Maybe the sealing pad of the oil pump is broken.
五、搅拌车搅拌筒的转速是多少？
5、 What is the rotational speed of mixer drum?
进料时搅拌筒的转速是：6---10转/分；搅拌时搅拌筒的转速：6--10转/分。
The rotation speed of the mixing drum during feeding is 6-10 rpm; the rotation speed of the mixing drum during mixing is 6-10 rpm.
六、8--12方的水泥自动搅拌车进料口到地面距离是多少？
6、 What is the distance between the feeding port of 8-12 cubic meters concrete mixer truck and the ground?
一般8--12方的搅拌车整车高度大概在3.8米左右，进料口距离地面就有3.5米左右，具体的根据不同的车型来定。
Generally, the height of 8-12 square mixer truck is about 3.8 meters, and the distance between the feed port and the ground is about 3.5 meters, which depends on different models.
七、水泥搅拌车怎么清洗罐？
7、 How to clean the tank of cement mixer?
搅拌车配的水箱，每次卸完料后就应该将水放入罐内，在返回时搅拌行使，到搅拌站后再将水排出接料。罐体外表应该在水箱加水时即可顺便清洗。当然也可以直接用水箱内的水清洗。如果水泥浆已经凝固，罐体内找专门的清罐，外表凝固用草酸刷洗就行了。
The water tank equipped with the mixer truck should put the water into the tank after unloading each time. When it returns, it should be stirred and discharged to the mixing station. The surface of the tank should be cleaned when the water tank is filled with water. Of course, it can also be directly cleaned with water in the water tank. If the cement slurry has set, find a special cleaning tank inside the tank, and brush the surface with oxalic acid.
Our website is: http://www.sdzkjf.cn We will serve you wholeheartedly and warmly. Welcome to visit!
上一篇：中科搅拌车购买后需要磨合吗？
下一篇：小型水泥自动搅拌车离合器正确使用
