Many people think that the cement automatic mixer is not used during this period of time, so there is no need to do any preventive work. In fact, it is not the case. Three things should be done so that the equipment can not go wrong.

　　防腐蚀

　　Corrosion resistant

　　水泥搅拌车工作完成后，要清理外部污垢，清理工作机构中的浓缩饲料和杂物，必要时用水或油清洗，需要擦干净再涂油，建议贴贴纸，减少接触空气氧化的机会。复杂、高精度的设备建议存放在室内阴凉、干燥、自然通风的地方；简单的设备如螺旋钻和给料器也可以露天存放，但应放置在高处、干燥且不受影响的地方建议搭棚遮盖阳光照射的位置；任何与地面直接接触的备件应由木板或砖块支撑；脱落的保护漆应重新粉刷。

　　Cement mixer after the completion of the work, to clean up the external dirt, clean up the concentrated feed and debris in the work mechanism, when necessary, clean with water or oil, need to wipe and then oil, it is recommended to paste stickers, reduce the opportunity to contact air oxidation. Complex and high-precision equipment is recommended to be stored indoors in a cool, dry and naturally ventilated place. Simple equipment such as auger and feeder can also be stored in the open air, but should be placed in a high, dry and unaffected place. Any spare parts in direct contact with the ground shall be supported by wooden boards or bricks; Peeling protective paint should be repainted.

　　反腐败

　　The anti-corruption

　　腐烂的木材零件由于微生物和雨、风、日光的作用而腐烂、开裂和变形。一个合理有效的储存方法是在木材的外表面涂漆并放置在干燥的地方。可以暴露在阳光和雨水中。纺织品，如帆布传送带，如果存放不合理，很容易发霉。此类产品不应放置在露天。需要将它们取出、清洗干净并晾干，然后存放在室内干燥的地方，可以防止蚊虫和啮齿动物的滋生。

　　Decaying wood parts decay, crack and deform due to microorganisms and the action of rain, wind and sunlight. A reasonable and effective storage method is to paint the outside surface of the wood and store it in a dry place. Can be exposed to sunlight and rain. Textiles, such as canvas conveyor belts, can easily become moldy if not properly stored. Such products should not be placed in the open air. They need to be removed, washed and dried, and stored indoors in a dry place to prevent mosquitoes and rodents from breeding.

　　抗变形

　　Resistance to deformation

　　弹簧、传动带、长刀杆、轮胎等备件会因长期受力或放置不合理而发生塑性变形。因此，应在框架下增加适当的支撑点；使轮胎不承载负载；所有被夹紧或拉开的弹簧都需要松开；将传动带卸下并妥善存放在室内；一些容易变形的拆卸部件，如长工具杆，应平放或垂直悬挂；轮胎、播种管等备件在存放时应防止挤压变形。

　　Spring, transmission belt, long knife bar, tires and other spare parts will be plastic deformation due to long-term stress or improper placement. Therefore, appropriate support points should be added under the framework; Make the tire not load bearing; All springs that are clamped or pulled need to be released; Remove the belt and store it indoors; Some easy to deform disassembly parts, such as long tool bars, should be flat or vertical suspension; Spare parts such as tires and seeding pipes should be prevented from extrusion deformation when stored.

　　以上就是水泥自动搅拌车闲置时要做好的预防工作，还有什么地方不明白的，欢迎您点击http://www.sdzkjf.cn这个网址进行咨询。

　　The above is the prevention work to be done when the cement automatic mixer is idle. If there is any place that you do not understand, you are welcome to click on the website http://www.sdzkjf.cn for consultation.