The feeding port of an automatic mixer truck is usually located in the center of the top of the vehicle body, used to load raw materials such as concrete and cement. Hydraulic lifting devices are usually used to control the opening and closing of the feeding hopper, as well as the high and low positions.
The feed inlet is usually equipped with a dust cover or a cover with a filtering device to prevent dust and debris from entering the vehicle and ensure the quality of the concrete.
The discharge port of an automatic mixer truck is usually located at the rear of the vehicle body, and a hydraulic discharge device is usually used to control the discharge of concrete. The position and form of the discharge outlet can vary, with some automatic mixer trucks discharging directly downwards and others tilting backwards to facilitate unloading of concrete to the desired location.
At the same time, the height of the discharge outlet can also be adjusted as needed to facilitate direct unloading of concrete to the construction location.
It should be noted that during the process of feeding and discharging, the stability and safety of concrete vehicles should be ensured to avoid overturning or damage caused by improper operation or excessive load. At the same time, the safety of the unloading location should be ensured to avoid affecting pedestrians and traffic around. If you have any questions, come to our website http://www.sdzkjf.cn Consult!