Mixing drum: The mixing drum used in this model is a widely used structural form. The mixing drum adopts a pear shaped structure, and the cleaning water and mixing water added as needed during transportation are injected into the drum from the feeding port at the head of the mixing drum.
Transmission system: The driving mode of the mixing drum is based on the engine as the power source, and the power is taken from the power take-off at the rear of the engine. It is transmitted to the variable displacement plunger hydraulic pump through the transmission shaft, and then driven to rotate by a quantitative plunger oil motor and a reducer.
The feeding and discharging system (loading and unloading mechanism) of the mixing drum is an important device that assists in the operation of the mixing drum.
Control system: It is the control component of the entire mixer truck, with a "I-shaped" groove on the control panel, which is the active space of the control rod; And a limited hole is opened on the slot in the rear half to fix the position of the joystick. The control system controls the forward and backward rotation and speed of the mixing drum through the left and right control levers at the rear of the car, thereby completing the feeding and mixing actions.
Water supply system: the water supply system of Concrete mixer is mainly used to clean the mixing device. There are two types of water supply systems for this vehicle model, one is a centrifugal water pump water supply system; One type is a pressure water tank water supply system, which can be optionally installed by users.
This article is a friendly contribution from the manufacturer of cement automatic mixer trucks. For more relevant knowledge, please click on: http://www.sdzkjf.cn Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned