您好,欢迎光临莱州聚峰机械有限公司网站! 郑重声明 进入官网

水泥自动搅拌车漏油的原因有几个方面?

来源:http://www.sdzkjf.cn/ 日期:2022-03-25 发布人:admin
  水泥自动搅拌车使用时间越长越是容易出现问题,这不,有用户就来反映,使用几年的设备突然开始漏油了,幸亏发现的及时让人维修好了,但漏油的原因还是不太懂,下面来看看一般是几个方面的原因吧。
  The longer the cement automatic mixer is used, the more likely it is to have problems. There are users to reflect that the equipment used for several years suddenly began to leak oil. Fortunately, it was found in time to be repaired, but the reason for the oil leak is not quite understood.
  要确定是漏油还是变速箱油。两者是有区别的,如有漏油,建议将车开到就近的维修店进行检查。可能会损坏发动机,损失会很大。
  The first thing to determine is oil leakage or transmission oil. There is a difference between the two. If there is oil leakage, it is recommended to drive the car to the nearest maintenance shop for inspection. It could damage the engine. It could be a lot.
  一般来说,水泥自动搅拌车漏油的原因一般有以下几个方面:
  Generally speaking, the reasons for oil leakage of cement automatic mixer car are as follows:
  1、凸轮轴承后盖不严漏油;
  1CAM bearing back cover lax oil leakage;
  2、曲轴前油封损坏漏油或曲轴后油封损坏漏油;
  2crankshaft front oil seal damage oil leakage or crankshaft after oil seal damage oil leakage;
  3、齿轮盖垫片装配不当、损坏或螺丝松动漏油;
  gear cover gasket assembly is improper, damage or screw loose oil leakage;
  4、油底壳垫片损坏或螺丝松动漏油;
  oil pan gasket damage or screw loose oil leakage;
  5、油底壳放油塞的垫片损坏、漏油或松动漏油;
  oil pan drain plug gasket damage, oil leakage or loose oil leakage;
  6、曲轴后端回油螺纹被污物、漏油堵塞,回油螺纹加工不当或螺纹轴颈与油封座孔同轴度超差等,导致混凝土搅拌机漏油;
  the back end of the crankshaft oil return thread is blocked by dirt, oil leakage, oil return thread processing or thread journal and oil seal seat hole coaxiality is super poor, resulting in oil leakage of concrete mixer;
  7、水泥自动搅拌车发动机支架板变形或垫片密封不严漏油;阀盖垫片密封不严漏油;
  cement automatic mixer engine support plate deformation or gasket seal is not strict oil leakage; Valve cover gasket seal is not tight oil leakage;
  8、摇臂室盖或推杆室盖未严格漏油;滤油器密封不严,漏油;
  Rocker chamber cover or push rod chamber cover is not strictly leaking oil; Oil filter seal is not strict, oil leakage;
  9、分配器壳体轴承孔密封不严漏油;油散热器密封不严,漏油;油泵垫片损坏或螺丝松动漏油。
  distributor shell bearing hole seal is not strict oil leakage; Oil radiator seal is not strict, oil leakage; Oil leakage from oil pump gasket damaged or screw loose.
  总之,生产是工作的前提,所以一定要做好水泥自动搅拌车日常的检查与保养。每天作业前和作业后必须绕机检查,以确保作业的。如果您还有想了解的关于该设备的问题,可以点击http://www.sdzkjf.cn网站咨询。
  In a word, safe production is the premise of work, so we must do a good job in the daily inspection and maintenance of the cement automatic mixing car. Every day before and after operation must be checked around the machine to ensure the safety of operation. If you have further questions about the device, you can visit http://www.sdzkjf.cn.

上一篇:水泥自动搅拌车车身划痕如何处理?
下一篇:水泥自动搅拌车使用期间的省油小技巧